Cisco Meraki MA-QSFP-40G-CSR4 Compatible 40G QSFP+ Module

Cisco Meraki Compatible ✔
QSFP+ Form Factor ✔
40G Speed ✔
400m Transmission Distance ✔
850nm Wavelength
MPO Connector ✔

SKU: NW-QSFP-40-S4-X850-0-3-M

Description

Enable 40G data transmission over fibre optic cabling on your Cisco Meraki brand switches, routers, security appliances and more. The Cisco Meraki MA-QSFP-40G-CSR4 Compatible 40G QSFP+ Module by Advance is fully tested to ensure 100% compliance with all Cisco Meraki switches, routers, appliances and devices that support MA-QSFP-40G-CSR4 modules. Fast plug-and-play operation, simply insert the Advance module into a spare QSFP+ compliant port and enjoy 40G speeds up to 400m using multimode fibre optic cabling with MPO / MTP connectors.

How this product works:

  1. Advance 40G Multimode QSFP+ Module – See our range here
  2. Advance Multimode OM3 MPO Patch Cable – See our range here
Transceivers
Vendor Compatibility Cisco Meraki
Transceiver Format QSFP+
Speed 40G
Transmission Distance 400m
Fibre Type Multimode
Wavelength 850nm
Connector Type MPO / MTP

Downloads

Product Downloads
Product Datasheet NNW-QSFP-40-XX-XXXX-XXX.pdf

Advance Warranty

All Advance brand transceivers, direct attach cables, active optical cables and breakout assemblies come with an unbeatable lifetime warranty and next day advance replacement when registered by the end user with Advance. This means in the unlikely event of failure we'll send you an equal or better replacement product to site the next working day so your engineer only needs to make a single visit to the cabinet and downtime is minimised. No other network hardware vendor offers a more complete warranty with every product at no extra charge!

For more information on specific Advance warranties and per-product information, terms and conditions, see our dedicated page here.

Advance Warranty

All Advance Active brand Ethernet switches, media converters, PoE devices and industrial Ethernet products carry a limited 2 year warranty. The Advance Active warranty also covers any included power supply unit for the same period, something virtually no other network hardware vendor offers. All Advance Active products can also be covered with an additional warranty extension at the time of purchase, providing up to 5 years of coverage ensuring your Advance product will be repaired or replaced in case of failure.

For more information on specific Advance Active warranties and per-product information, terms and conditions, see our dedicated page here.

Advance Warranty

Advance brand infrastructure products including fibre optic patch cables, copper RJ45 patch cables, MPO/MTP cable assemblies and preterminated fibre optic cable assemblies all carry a 2 year limited warranty as standard, ensuring your infrastructure products will operate as expected or Advance will repair or replace any failed product at no cost. Advance infrastructure warranties can also be extended at the time of purchase, up to 5 years, for complete piece of mind that your network is covered.

For more information on specific Advance Infrastructure warranties and per-product information, terms and conditions, see our dedicated page here.

Advance Compatibility

Advance rigorously test our products to ensure full compatibility with each vendor we support. This includes full DDM/DOM (digital diagnostic/optical monitoring) reporting where available, as well as standard EEPROM coding. Advance products are plug and play, with no command line hacks required to enable a module or override module checking on the host device, which could void the warranty with your vendor. Advance support over 60 vendor's hardware and can custom code modules according to individual requirements.

To read more about vendor warranties when using compatible products check out our informative post here.

Advance Compliance

Advance products are manufactured in modern, high-tech facilities that are inspected and certified to ISO 9001-2015 and ISO 14001-2015 standards. All our products are tested by independent bodies to certify CE compliance, FCC conformity and to ensure all materials are RoHS compliant. As well as ensuring all our products meet the requirements set out by regional and standardised assurance systems, each product is developed and produced in line with the mechanical, opto and electrical standards defined by IEEE, SFF Committee (SNIA SFF TA TWG) and the SFP and SFP-DD MSAs (multi-source agreement), where applicable.